Loosen the screw at the top of the wooden embroidery hoop and separate the inner ring from the outer ring.

Layer the sandstone/brown/tan felt on top of the green felt so that 4″ (10cm) of the green is at the top and 3″ (7.5cm) of the tan is at the bottom. Place the inner hoop underneath the layered felt.

Fit the felt loosely into the outer ring of the embroidery hoop. Pull the felt gently from the back to ensure the felt is taught and then tighten the screw at the top of the hoop.

Use scissors to trim the excess felt from the back of the hoop. Apply a thin line of hot glue to the cut edge of the felt to secure it.

Paint the top of the outside and front edge of the wooden hoop with bright green acrylic craft paint, lining it up with the green felt. Set aside to dry. Apply a second coat, if necessary.

Paint the bottom of the outside and front edge of the hoop with tan acrylic craft paint, lining it up with the tan felt. Set aside to dry. Apply a second coat, if necessary.

Download, print, and cut out the patterns. Attach the paper ears to the green felt, and the collar to the tan felt with straight sewing pins. Cut everything out with scissors.

Place a small dab of glue at the base of each ear and fold partially in half. Glue the ears to the top right and top left of the embroidery hoop, using the metal screw as your center point.

Place a piece of scrap paper into the pocket so that the glue doesn’t seep through, then attach the collar to the top edge of the tan felt pocket with hot glue.

Using the brown dimensional fabric paint, outline the collar and draw on a few folds to mimic the look of the fabric. Leave to dry.

Step 8 – Add Hanging Loop: This is an optional extra step. Create a hanging loop and tie it to the metal screw so that you can hang your Grogu organizer on the wall.

Slide your paper mementos and tickets into the pocket and display your organizer where desired!

If giving the organizer as a gift you can finish the back with a circle of neon green or tan craft felt.